-
08-06-2016
#21
Re: Bobby K's 2014 Silverado LT
Mostly my calculations! I see the baffle in my head, but it's not transferring to MDF very well. I have (4) DD 608 Redline 8's, and I'm try to fit a 3.5 cube box under my back seat with the subs forward. I have 10" of height in the front of the box, and the subs are 8.5", so it's not leaving a lot for top and bottom. I'm going to dado a channel into the top and bottom panels, I just need to draw it all out instead of cutting first and planning later. It's been so humid here, I have done nothing, so this week it's lower 80's and light humidity, and I'm trying to fit everything in...
-
08-06-2016
#22
Re: Bobby K's 2014 Silverado LT
I normally build the top and sides, then add the back and front afterward, that way you're not adding thickness to the edges of the baffle
-
08-10-2016
#23
-
08-10-2016
#24
-
08-10-2016
#25
Re: Bobby K's 2014 Silverado LT
-
08-10-2016
#26
Re: Bobby K's 2014 Silverado LT
Installed Tang Band 6.5's for passenger convenience.
-
08-11-2016
#27
Re: Bobby K's 2014 Silverado LT
A little more work today:
-
08-29-2016
#28
-
10-18-2016
#29
Re: Bobby K's 2014 Silverado LT
Thank you guys for pointing out that speakers in the center will not work as I intended. I traded the 4" Audiofrogs and I have been bartering quite a bit, so here are pics of my latest iteration of my set up:
I'm not sure whether it will be the 2 Eclipse 15's, or the 4 DD 8's. If it's the 8's, then I'll need another CAB 1600.1, or something that will do .5 ohms and 2k watts...
-
10-18-2016
#30
Re: Bobby K's 2014 Silverado LT
Fifteeens! Fifteeens! Fifteeens! Fifteeens! Fifteeens!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Back To Top