made a bit more progress this weekend. Thankfully Saturday was wonderful weather.
I started Friday by glassing up the driver side footwell for the midbass enclosure.
That turned out to be an issue when it wouldn't cure. I guess I should have done a test with my really old can of resin I let it sit overnight and it was still tack the next day. So, I did the next best thing, I got my 2nd can of really old resin, but different brand, whipped up a test batch. It cured fine. Great, put a couple more layers of mat down and put that in.
and... it didn't fully cure either... It did enough to pull the piece and it retain it's shape which was good enough for the time being.
So while I decided what do with that, I went ahead and build the mount for the Rane.
Just have to drill the holes for mounting to the trunk and mounting the rane itself and it's done.
Back to the enclosure, I decided to use what had, so I mated it to the baffle with success. I did got buy some new resin yesterday to finish it up though.
Needs to be cleaned up a bit and of course covered, but it pretty solid. I have 7 or 8 layers of 1.5oz mat in there so it is fairly stout.