I decided since I am spending so much time in my office lately, I needed to build a better speaker system. Right now it has the polk RM8 surround sound system and they are terrible to say the least.
I will have about $200 total after I have them finished for the speaker build.
Here is an objective review of them from another site and seem very promising:
https://www.audiosciencereview.com/f...-review.12693/
I also added a 0.22 uf capacitor across L2 based on these results from PE tech forums Cnote Designer Chris P:
Here is before:
Here is after with 0.22uf: It knocks down the 7000hz to 10,000hz hump in the woofer.
Here are some pictures of the build so far:
I used 3/4" 3 layer sound absorber from parts express: https://www.parts-express.com/sonic-...-x-24--260-530
This is the crossover design. It should be a 2nd order on the woofer and 3rd order on the tweeter if my understanding is correct:
I still need to sand it down, drill the 2" hole in the back for the round speaker terminal, and then I am going to cover it in white melamine. I wanted to try this stuff and this gave me an excuse:
https://www.parts-express.com/band-i...on-on--260-034