Originally Posted by
naiku
The back of them look identical to the Infinity 20MX, but the front looks different, could be just the color, but something looks a little different to them. I am sure once you get them fired up you will be pretty pleased with the performance.
One word of warning, if you are going to solder connections onto them, be very careful..... I soldered connections onto my 20MX, somewhere along the way the soldered connection became loose (likely if I were better at soldering, this would not have happened). Anyway, while trying to clean off old solder from the terminal, whatever is holding the spade connector to the mid itself melted before the solder did. So, in the end I had to do a hack job repair that I am not proud of in the slightest!