They might say "don't try this at home" but nothing about not trying it at your friend's house.
Arc Audio
Arc 1000.6, you can order the amp with a DSP or without
2019 Honda Ridgeline Black Edition | FiiO M11 (Coax) & OEM Radio | Arc Audio Arc 1000.6 w.IPS8.8 & 1000.4 | Arc Audio RS 1.0, 3.0, 6.0 | AudioFrog GB10D2
2013 Dodge Avenger | FiiO M11(Coax) & ///ALPINE CHA-S624 & CRA-1667RF(Toslink) | Arc Audio PS8PRO & PSC & | TRU Technology Tungsten T2, T4, TG2 & LINE-8 v2(modded) | Audio Frog GB10, GB40, Morel ELATE Ti MW 9, Arc Audio Black 12"
Ive been out of the game for a long time, but the Zapco ADSP-Z8 IV is a pretty sweet piece.
It has 8 channels, but you can bridge them.
Im using it in six channel mode. Two channels at 4 ohms for fullrange drivers (80 watts each), two channels at 2 ohms for midbass (120 watts each) and the rest of the channels bridged (240 watts x 2 at 4ohms each for a total of 480 watts on a sub).
Nice specs, really small footprint (8.57"x9"x2"), a lot of inputs (high/low level, rca aux, toslink, bluetooth).
Specifications
- DSP Processor: Cirrus Logic CS47048
- Power: 150 MHz/32 bit/48 KHz
- 8-Channels
- ADC: Cirrus Logic CS5368 24 bit/192 KHz
- ADC Dynamic Range/THD: 114 dB/-105 dB
- DAC: Cirrus Logic CS47048 32 bit/192 KHz
- DAC Dynamic Range/THD: 108 dB/-98 dB
- Low level (Pre)/Sensitivity: 8/1-5 VRMS
- High Level (Spk In)/Sens.: 6/2-20 V
- AUX Inputs/Sensitivity: 1/0.2-4 VRMS
- Optical IN: 24 bit-192 KHz
- Freq. Response (-3dB): 10 Hz - 22.5 KHz
- S/N Ratio only DSP Digital Input: 110 dBA
- S/N Ratio only DSP Analog Input: 106 dBA
- S/N Ratio Amp + DSP at max. power: 95 dBA
- THD+N only DSP Digital Input: 0,002 %
- THD+N only DSP Analog Input: 0,005 %
- THD+N Amplif. + DSP Analog Input: 0,07 %
- Crosstalk at 1 Khz only DSP: 90 dB
- Crosstalk Amplifier + DSP: 45 dB
- Amp Power @ 4Ω: 8 x 80 watts
- Amp Power @ 2Ω: 8 x 120 watts
- Amp Power @ 4Ω Bridged: 4 x 240 watts
- Amp Power @ 4Ω: 6 x 80 + 1 x 240 watts
- Amp Power @ 2Ω: 6 x 120 + 1 x 240 w. (4 Ω)
- F/R EQ: 1-6 ch Gr. & Par./31 poles
- Effect EQ: 7-8 ch Gr. & Par./11 poles
- Mute/Solo: Yes, each channel
- Time Align. (Range/Steps): 0/15 ms / 0.02 ms
- Max Delay (Cm/Steps): 515 cm / 0.68 cm
- Polarity: 0/180°
- Display (included): 1” LCD
- Display (optional): 3” LCD Touch-Screen
- Bluetooth Digital Streaming
- PC/Display Connection: USB/6-pin Mini DIN
- Unit Dimensions: 222(L) x 230(W) x 52(H)
- Display Dim.: 111(L) x 49(W) x 16(H)
J.
That Zapco piece looks really nice for a compact one and done solution.
They might say "don't try this at home" but nothing about not trying it at your friend's house.
A pair of those Zapco ADSP-Z8 IV-8 was my original plan for my wife's Mazda 6. Now with the Helix V Twelve on the horizon, that is now the plan. Simplifying to a single DSP solution just makes way more sense. If Zapco were to release an ADSP-Z8 IV-12 (or 16) I wouldn't hesitate to go that route, either.
New Truck | No System
2015 MECA SQL Street | 2017 & 2018 MECA Modex California State Champion
If you want an even more compact amp with similar DSP I/O, slightly less power, plus bridging on channel's 5/6 and/or 7/8 and line outputs for channel's 7 and/or 8 when 5/6/7/8 are bridged. The Arc Audo PS8-50 is a great choice too. Been running it for a longtime now. We love it. OEM integration is killer.
independent review: https://www.arcaudio.com/sites/defau...S8_50_engl.pdf
Specs:
ARC Audio DSP Amplifier 8x50W 4ohms, 8x100W 2ohms
PS8-50
The PS8-50 is an incredibly compact 8-channel amplifier that boasts the full suite of Pro-Series signal process in a compact chassis that will fit under the seat or in a storage compartment in almost any vehicle. Each channel of the PS8-50 will deliver up to 100 Watts of power and pairs of channels can be bridged to deliver an impressive 200 watts into a 4-Ohm Load. Finally, as the heart of an elaborate 4-way system, the PS8-50 includes a pair of stereo outputs that can drive an external amp while channels 5 and 6 of the processor are used in a bridged configuration to power a mid-bass driver or similar application that required large amounts of power.
Specifications
- 8-Channels @ 4-Ohms (Ch 1-8): 50 Watts
- 8-Channels @ 2-Ohms (Ch 1 - 8): 100 Watts
- 4-Channel @ 4-Ohms (Ch 1-4 Bridged): 200 Watts
- Amplifier Frequency Response: 10Hz - 30kHz
- Fuse: 3 x 30 Amp
- DSP: Built In
- Processor Resolution: Fixed Point Native 32-Bits
- Sample Rate: 96kHz/192kHz
- Analog Inputs: 8 ch. Differential in (RCA or Speaker Level)
- Input Sensitivity: .5V - 32V RMS
- Digital Inputs: TOSLink
- Auto-sense Turn-On: Yes, Signal & DC (BTL) (Uses Ch 1/2 Inputs Only)
- Outputs (RCA): 2-Channels (Supplemental Ch 7/8)
- Outputs Voltage (RCA): Up to 8V
- Input Impedance (rca): 10k ohms
- Frequency Response: 2Hz - 23.5kHz
- S/N Ratio 1V 1:1: 107.1dBdB
- S/N 4V 1:1: 108.dBdB
- Operating Voltage: 6V - 17.0V (Start Stop Compliance to 4.5V)
- Output Equalization: 248 Bands 1/3rd Octave (linkable) -or- 248 Bands variable Parametric EQ
- Output Equalization Resolution: 1/10th dB per step +20dB / -24dB
- Output Signal Delay: Up to 30ms per channel in .01ms increments (Fixed Point Delay)
- Input Signal Mixer: Yes - 10-Channels In (Including Digital) x 10-Channels Out (Including Up-Mixer Out)
- Advanced Mixer (Output Signal Mixer): Yes, When Selected
- Easy-to-use Mixer Assistant: Yes, Exclusive to the PS8-Pro, PS8-50 and IPS8.8
- Crossovers: Phase Correct AP/HP/LP/BP all channels
- Crossover Slopes: 6dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB, 48dB Slopes all bands all channels
- Crossover Types: Butterworth, Linkwitz-Riley, Bessel, Variable Q, Chebyshev (all channels all bands)
- Crossover selectable frequencies: 10Hz - 20kHz in .01 Hz increments)
- Output Signal up mixer: Yes
- Input Signal Equalization: 12-Bands Parametric (linkable) Per Channel
- Input Equalization Resolution: 1/10th dB per step +20dB / -24dB
- Input Equalization All Pass Filters: Yes - Individual per input EQ band
- Input Signal Delay: Yes - Up to 11.04ms per channel input
- Presets: Up to 4-Presets
- Hi-Res Bluetooth (Streaming Audio): Yes - Requires ARC BTM & BDM (Both Required) (Sold Separately) COMING SOON
- External Remote Level Control: Yes (ARC PSC or LR1) (Sold as an accessory, not included)
- AXP WiFi control adapter card: Exclusive to the Pro Series DSP's (Sold Separately)(COMING SOON)
- Preset selection without controller use: Yes - Optional manual trigger switches +/- for up to 4 presets (Not Included)
- Remote Turn-On Output Controls: Turn on Output (up to 40ms), Turn-on Hold (up to 40ms), Auto-sense hold time (up to 200ms)
- Remote Turn-On Output On/Off lead timing control: Remote on/off adjustable up to 40ms each
- Maestro AR Module interface capable: Yes - Requires Maestro T-Harness and data cable for connection
- Expansion Capability (8-CH, 16-CH, 24-CH: PS8-50's can be ran in multiples with individual USB connections to a single PC with single operating software being used
- Software Interface: Windows PC Required (Windows 8 & Windows 10)
- Windows OS Notice: Note that the Pro-Series software is ONLY recommended for use with authentic licensed versions of the Windows Operating system. Use of counterfeit, cracked or hacked versions are not guaranteed to work and can cause unwanted and/or undesired results while using any ARC branded DSP or ANY DSP on the market. Use of anything other than an authentic licensed version of Windows will void ALL warranty and support of ARC Audio DSP products and its user interface
- Dimensions: 10.35”(L) x 5.7”(W) x 3.8”(H)
2019 Honda Ridgeline Black Edition | FiiO M11 (Coax) & OEM Radio | Arc Audio Arc 1000.6 w.IPS8.8 & 1000.4 | Arc Audio RS 1.0, 3.0, 6.0 | AudioFrog GB10D2
2013 Dodge Avenger | FiiO M11(Coax) & ///ALPINE CHA-S624 & CRA-1667RF(Toslink) | Arc Audio PS8PRO & PSC & | TRU Technology Tungsten T2, T4, TG2 & LINE-8 v2(modded) | Audio Frog GB10, GB40, Morel ELATE Ti MW 9, Arc Audio Black 12"
The Arc is also a really nice piece. I've heard Brian Mitchell's car using that DSP amp and it sounds awesome! (YMMV)
The Arc does have a smaller footprint with single sided connections, but overall volume is a little larger than the Zapco.
New Truck | No System
2015 MECA SQL Street | 2017 & 2018 MECA Modex California State Champion
Ben Z ran the Zapco at finals in his Durango. Impressive for sure.
2019 Honda Ridgeline Black Edition | FiiO M11 (Coax) & OEM Radio | Arc Audio Arc 1000.6 w.IPS8.8 & 1000.4 | Arc Audio RS 1.0, 3.0, 6.0 | AudioFrog GB10D2
2013 Dodge Avenger | FiiO M11(Coax) & ///ALPINE CHA-S624 & CRA-1667RF(Toslink) | Arc Audio PS8PRO & PSC & | TRU Technology Tungsten T2, T4, TG2 & LINE-8 v2(modded) | Audio Frog GB10, GB40, Morel ELATE Ti MW 9, Arc Audio Black 12"