Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: PaulD's new install

  1. Back To Top    #1

    PaulD's new install

    The car : 2018 Honda Civic Si Coupe




  2. Back To Top    #2

    Re: PaulD's new install

    SOME WIRING









    WIRES FROM AMP RACK:

  3. Back To Top    #3

    Re: PaulD's new install

    SOME CLD PICS










  4. Back To Top    #4

    Re: PaulD's new install

    FRONT SPEAKERS

    RINGS TO APPX THE FACTORY MID


    INSTALLED IN DOOR WITH FAST RINGS, BEAD OF BUTYL ROPE AROUND BOTTOM OF RING TO SEAL TO DOOR


    TWEETER IN FACTORY LOCATION, FIT SO TIGHT THE SCREWS ARE ONLY FOR AESTHETICS

  5. Back To Top    #5

    Re: PaulD's new install

    SUBS IB

    SET UP FOR FIDUCIARY HOLES


    MOCK UP


    BACK SEATS FOLDED DOWN


    FROM BACK WITH UNFINISHED AMP RACK

  6. Back To Top    #6

    Re: PaulD's new install

    RUX PROCESSOR CONTROLLER MOUNTED AT BOTTOM OF CONSOLE


    GARAGE DOOR OPENER MOUNTED REMOTE


    BUTTON FOR GARAGE DOOR OPENER AND FOOTWELL LED LIGHTING



  7. Back To Top    #7

    Re: PaulD's new install

    Amp rack with cover on, trestles in the middle are because the top is so thin


    FUSE ON LEFT IS CONSTANT 12V, STRIP IN BACK IS GND, BOX IS IN MIDDLE IS AUTO TURN ON RELAY, STRIP ON RIGHT IS FOR AUTO TURN ON - INCLUDING FANS


    COVER INSTALLED - FANS PULL, AIR IS DRAWN THRU GRILLS LOCATED OVER AMP COOLING FINS
    Last edited by PaulD; 07-09-2018 at 09:20 AM.

  8. Back To Top    #8

    Re: PaulD's new install

    Equipment list:
    Stock headunit and amp
    JL audio Fix-82 (flattens output of OEM amp and provides optical out to processor)
    Processor: Alpine PXA-H800 and RUX-C800
    Amps: JL audio HD 600/4 and 1200/1
    tweeters: ScanSpeak D3004/6020-00
    Mid: ScanSpeak 18w4531
    Subs: AE IB12AU

  9. Back To Top    #9
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Re: PaulD's new install

    That's impressive! Very good job!
    Are you not entertained?!?!


  10. Back To Top    #10
    Noob slamd1's Avatar
    Real Name
    Jim
    Location
    Oklahoma
    Vehicle
    2011 Dodge Challenger
    Posts
    22
    Join Date
    Jun 2018

    Re: PaulD's new install

    Good job. Glad you got the pic posting working.
    Current System:

    Headunit: Clarion CZ702
    Highs/Mids: PPI S.65 Tweets, Crunch CS35 3.5 (crossed passively on high out of deck)
    Midbass: CT Sounds Meso Pro 6.5 (crossed actively using mid out on deck)
    Sub: Sundown Audio EV3 12 D2
    Amp 1: RF r250.4 - Highs/Mids
    Amp 2: Pioneer GM-D8601 Sub @ 1 ohm
    T line enclosre

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top