Results 1 to 10 of 10

Thread: MB Quart MB Quart ZA2-1000.4

  1. Back To Top    #1
    Noob Dsaulen0902's Avatar
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Posts
    29
    Join Date
    Dec 2017

    MB Quart MB Quart ZA2-1000.4

    I recently purchased an MB Quart ZA2-1000.4.... It has two x-overs one for channels 1&2 and one for channels 3&4. It is also bridgeable. My question is can i use the lowpass x-over for channels 1&2 and bridge them, to run a 12" sub. Then use the highpass x-over for channels 3&4 and leave them unbridged to run two 6x9'S. Or do they all need to be Bridged.. Or all need to be unbridged. Thx in advance for any help...

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	za210004.jpg 
Views:	20 
Size:	59.8 KB 
ID:	6311   Click image for larger version. 

Name:	za210004 (1).jpg 
Views:	28 
Size:	59.7 KB 
ID:	6312  

  2. Thumbs Up Hic gave this post Thumbs Up
  3. Back To Top    #2
    Pretentious Posturer Notloudenuf's Avatar
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Real Name
    Kendal
    Location
    Eastern NC
    Vehicle
    company truck
    Posts
    860
    Join Date
    Jan 2014

    Re: MB Quart MB Quart ZA2-1000.4

    You are trying to run it in 3 channel mode. This is perfectly ok to do.
    This is best shown on page 2 of the manual in the picture marked "4ch - Mixed Mono"
    https://assets.sonicelectronix.com/m...art/z2amps.pdf
    2017 CR-V

  4. Thumbs Up Hic gave this post Thumbs Up
  5. Back To Top    #3
    Noob Dsaulen0902's Avatar
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Posts
    29
    Join Date
    Dec 2017

    Re: MB Quart MB Quart ZA2-1000.4

    Any idea what the RMS wattage would be and the impedance

  6. Back To Top    #4
    Noob Dsaulen0902's Avatar
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Posts
    29
    Join Date
    Dec 2017

    Re: MB Quart MB Quart ZA2-1000.4

    If I wire it like this would it be enough or to much power for a Pioneer TSW311D4 12" Subwoofer with dual 4-ohm voice coils. Max power handling: 400 watts RMS (200 watts RMS per coil) / peak power handling: 1,400 watts.. Im not looking to thump the neighborhood, Just want my system to sound really good in the vehicle without burning something up, If it thumps the neighborhood, well then "bonus"

  7. Back To Top    #5
    Seer Newby Hic's Avatar
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Real Name
    Hic
    Location
    Michigan
    Vehicle
    99 Contour SVT
    Posts
    2,576
    Join Date
    Jul 2013

    Re: MB Quart MB Quart ZA2-1000.4

    Good choice on sub !
    https://www.sonicelectronix.com/item...TS-W311D4.html

    Fs = 43 Hz ( tune to that )

    Series wiring equals 8 ohm load amp sees and parallel wiring equals 2 ohm load amp sees.

    2 ohm will cause more current to flow thru amp , thus causing more heat.

    Usually a bridged amp can only handle 4 ohms minimal , so 8 ohms is what I'd reccomend.

    Yup 4 ohms bridged.
    https://www.sonicelectronix.com/item...-RA1000.4.html

    As ohms double to 8 , watts gets cut in half for output to sub
    Last edited by Hic; 12-26-2017 at 10:35 PM.
    0bey the authorities , or suffer the same fate as Jesus ? Trumped up charges and other bad things

  8. Back To Top    #6
    Seer Newby Hic's Avatar
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Real Name
    Hic
    Location
    Michigan
    Vehicle
    99 Contour SVT
    Posts
    2,576
    Join Date
    Jul 2013

    Re: MB Quart MB Quart ZA2-1000.4

    https://www.sonicelectronix.com/item...PX2000.1D.html

    @ 2 OHMS YOU'LL get 500 watts ( perfect ) and it has a subsonic filter , you will need one with a ported box.
    0bey the authorities , or suffer the same fate as Jesus ? Trumped up charges and other bad things

  9. Back To Top    #7
    Seer Newby Hic's Avatar
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Real Name
    Hic
    Location
    Michigan
    Vehicle
    99 Contour SVT
    Posts
    2,576
    Join Date
    Jul 2013

    Re: MB Quart MB Quart ZA2-1000.4

    You can use up to 1 ought wire on ZA ? Whatcha plannin on runnin ?

    Using a fuse ? It is reccomended to install one as close as possible to battery.
    0bey the authorities , or suffer the same fate as Jesus ? Trumped up charges and other bad things

  10. Back To Top    #8
    Noob Dsaulen0902's Avatar
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Posts
    29
    Join Date
    Dec 2017

    Re: MB Quart MB Quart ZA2-1000.4

    I ordered i kit has 4g power and 4 g ground plus inline fuse holder with 80 amp fuse

  11. Thumbs Up Hic gave this post Thumbs Up
  12. Back To Top    #9
    Seer Newby Hic's Avatar
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Real Name
    Hic
    Location
    Michigan
    Vehicle
    99 Contour SVT
    Posts
    2,576
    Join Date
    Jul 2013

    Re: MB Quart MB Quart ZA2-1000.4

    Nice !
    0bey the authorities , or suffer the same fate as Jesus ? Trumped up charges and other bad things

  13. Back To Top    #10
    Hi-Fi Junkie Hi-FiDelity's Avatar
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Real Name
    Nick
    Location
    Outside Chicago
    Vehicle
    2005 Dodge Magnum R/T
    Posts
    940
    Join Date
    Jul 2013

    Re: MB Quart MB Quart ZA2-1000.4

    could we get some gut shots. would be interested to see what the board looks like

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top