Blackhawk Fan,
Made in Taiwan (a republic of china)
Good , Dayton has been used by me [ Titanic MK III ]. Very clean , clear sound !
The High-Fidelity model has a little over 1/2 inch linear excursion with an equivalent compliance ( fs - 2.97 cubic feet ). Cone material is anodized aluminum , bass box pro 6 , reccomends an enclosure of 1.7 cu. ft with a rolloff frequency ( f3 = 40 hZ ) will handle more than 400 watts in this box and has a 3.1 ohm or nominal 4 ohm rating ! ( Will easily handle the peak wattage for transients = 800 watts )
Very good !
Use a class d amp rated for 1,000 watts @ 4 ohms for " sweetest sound "
In the smaller than 3 cube box , extreme lows or Low lows get sacrificed [ No Tub Thump or Hair Tricks ]