Originally Posted by
Hi-FiDelity
Ok, I was messing with the T/A on my new HU, so I can have it set to match my car instead of using the default "sedan" setting. I wanted to give the measuring the distance from each driver to the desired listening position (Front Left in this case). From myh understanding I would measure the distance from the farthest driver from the desired listening position (Right Rear) and set the distance/delay to the measurement on the HU (57 inches in my case). You would then take a measurement of the next furthest driver (front right) and add the difference between the two to get the T/A for that driver. It was 55 inches which is 2 inches closer meaning I set it to 58 inches, correct?