Page 1 of 7 123 ... LastLast
Results 1 to 10 of 69

Thread: Chithead's 2003 Corvette Z06

  1. Back To Top    #1
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Chithead's 2003 Corvette Z06

    Well. Hello there. Welcome back, for another edition of... chithead starts a build log. You're all familiar with the show... so let's get started.

    Here we have our latest acquisition - a 2003 Corvette Z06:







    She's in pretty good shape for the year. My first Corvette, and am already in love with this black beauty. Definitely way more than I was expecting the car to be in every category. Let's take a look at some of the areas that need attention.

    Doors:



    Pillars:



    Radio:



    Trunk area:



    And the empty passage from the trunk into the cabin area:

    Are you not entertained?!?!


  2. Back To Top    #2
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Re: Chithead's 2003 Corvette Z06

    Did a little digging, and have discovered a few things. Such as this peeking out from the center console behind the passenger seat:



    Pulled both wires out, looks to be a 2-channel RCA and possibly a remote turn-on wire - perhaps for a mono amp and subwoofer that are not in there anymore:



    Found an awesome pattern to build a divider wall that helps reduce in cabin noise from the trunk area, might use this to start the subwoofer enclosure/amp rack:



    She cleans up rather nice:



    Are you not entertained?!?!


  3. Back To Top    #3
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Re: Chithead's 2003 Corvette Z06

    Did the first audio mod today: From, no antenna:



    To... antenna!



    Dash kit arrived today as well:



    Requires relocating the temperature controls, and removing or cutting a bracket in the dash. At least they give you this nifty template for drilling:



    Also scored a, "used" dash pad that looks to be brand new from a place I'm ordering parts on eBay:



    My first time using a dash pad. Thought what the heck, price was good, and couldn't hurt to protect the dash.
    Are you not entertained?!?!


  4. Back To Top    #4
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Re: Chithead's 2003 Corvette Z06

    Playing around with some speaker placement. Hoping to use a set of 8" subs for midbass, and single 12" sub for bass, or maybe use two in IB configuration by modifying that divider wall template just a bit? Definitely open to ideas/opinions regarding this:



    Thinking a 8" behind each seat, over near where the factory 5.25" speakers are mounted:



    An IDMAX 12 fits between the trunk cubby and the ledge rather easily:





    This is where we're at so far. I like the idea of a ported enclosure with a single subwoofer for ease of installation and enjoyment, but have also considered doing a clamshell IB wall to fit two IDMAX 12's in the same middle spot there.

    Head unit will most likely be the Alpine ILX-407 that I purchased for the Mustang before it went bye-bye. Pretty good source unit with everything I like to have on a daily basis. Plus, capability to utilize a front and rear camera.

    Everything else is a toss up at this point.
    Are you not entertained?!?!


  5. Back To Top    #5
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Re: Chithead's 2003 Corvette Z06

    Messed around with them in the rear, "cubbies" too:



    Plenty of room in the two sides for the 8" subs:





    And gobs of room in the middle for a single sealed IDMAX 12:

    Are you not entertained?!?!


  6. Back To Top    #6
    Dickhead SublimeZ's Avatar
    Real Name
    James
    Location
    Deepinthehearta, TX
    Vehicle
    2016 Ram Lonestar
    Posts
    2,102
    Join Date
    Feb 2013

    Re: Chithead's 2003 Corvette Z06

    I know for a fact these cars can sound good...


  7. Back To Top    #7
    Noob Notloudenuf's Avatar
    Real Name
    Kendal
    Location
    Eastern NC
    Vehicle
    '02 330Ci & '20 Tacoma
    Posts
    1,410
    Join Date
    Jan 2014

    Re: Chithead's 2003 Corvette Z06

    I feel somewhat responsible for this car. You have 2 months.
    https://www.caraudiojunkies.com/signaturepics/sigpic150_2.gif
    2002 330Ci & 2020 Tacoma

  8. Back To Top    #8
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Re: Chithead's 2003 Corvette Z06

    A little progress today. The Alpine iDA-X305S that was installed in the car, is out. And an iLX-407 with dash kit is in.

    How it was starting out this morning:



    Wasn't too terribly difficult removing the console, and nothing broke! Well, nothing I removed broke. Anywho, trim pieces removed:



    Yucky chucky... oh and guess where the other end of that RCA cable went? Not to the head unit:



    iDA-X305S removed, found where the remote turn on wire went:



    Also found an ai-net connector and pink w/black stripe mute wire going to the driver side, guess maybe they had a Parrot Bluetooth at one point? Not in there now though:



    And also some good news, had already assumed there was some sort of adapter to make the radio work in the car, and here it is:





    Everything out! Now we MODIFY!!!

    Are you not entertained?!?!


  9. Back To Top    #9
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Re: Chithead's 2003 Corvette Z06

    A lot of double din installs I've watched - they cut the brackets in the dash. I didn't like this. Not one bit. Pet peeve maybe? I dunno. Knew right from the beginning I'd be taking the harder path. Getting ready, to drill some rivets:



    Two done, six more to go:



    Took a break right here though to do the HVAC controls relocation using the supplied template:



    Wasn't too difficult. Getting all eight rivets out though, was a pain in the boo-hiney. But it's done:



    HVAC controls relocated perfectly:



    Also took this opportunity to install a new key trim piece:



    See the broken pieces:



    And new one all clicked onto the switch:

    Are you not entertained?!?!


  10. Back To Top    #10
    Senior Member chithead's Avatar
    Real Name
    Daniel
    Location
    Concord,NC
    Vehicle
    We don't talk about it
    Posts
    3,052
    Join Date
    Jul 2013

    Re: Chithead's 2003 Corvette Z06

    The double din trim piece next to the OEM trim:



    So the brackets in the kit work. But alignment, wasn't so great with these. Had to make two modifications on each one to get a much nicer fit into the new trim opening. Just clip here, and drill here:



    Connected and modified the Axxess harness more to my particular liking:



    And here is everything put back together:







    And... it was at this point I realized, the antenna was connected, USB cable plugged in, fuel door switch, traction control, airbag light, all hooked back up. Except the radio harness. Forgot to plug in the frickin' radio harness. Oh well. Didn't take long to take everything back apart, plug it in, and here we go:

    Are you not entertained?!?!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back To Top