Schnazzy!
Kenwood DDX9903S, Arc PS-8 w/PSC, Arc Audio 1200.6, Helix SPXL1000, Audiofrog GB12D4(2) IB, GB60, GB25, GB10
Those AD 8" seem to be becoming popular. I need to hear a set.
Another couple small steps done, since weather went from Antarctic to Hell in one week! I installed a muffler delete, and car back exhaust from a V6 Camaro, which was waaaay less restrictive than the V8 midpipes. I have received my long tube headers, so those will be next, and then a custom tune to turn off AFM, top speed limiter, and adjust to current mods. I am going to need to pull the interior so I can sound deaden under carpet and the rear shelf, although with more open exhaust and windows down, the system keeps up just fine!
I also finally installed rims/tires which increased the footprint on all 4 corners by 1.5”!!!
Kenwood DDX9903S, Arc PS-8 w/PSC, Arc Audio 1200.6, Helix SPXL1000, Audiofrog GB12D4(2) IB, GB60, GB25, GB10
Amp stands I designed thanks to inspiration from Papa’s floating amps. I designed them so the front band will hide the wiring, which goes through the upright and down through a hole in the base. This will allow it to go through my trunk false floor, into the spare tire well.
These were made by Alan Abernathy in Florida, based on drawings and a cardboard model I put together.
They are made perfectly to my specs, welds are gorgeous, and mounting holes are exact!
Kenwood DDX9903S, Arc PS-8 w/PSC, Arc Audio 1200.6, Helix SPXL1000, Audiofrog GB12D4(2) IB, GB60, GB25, GB10
Very nice work.
Current System:
Headunit: Clarion CZ702
Highs/Mids: PPI S.65 Tweets, Crunch CS35 3.5 (crossed passively on high out of deck)
Midbass: CT Sounds Meso Pro 6.5 (crossed actively using mid out on deck)
Sub: Sundown Audio EV3 12 D2
Amp 1: RF r250.4 - Highs/Mids
Amp 2: Pioneer GM-D8601 Sub @ 1 ohm
T line enclosre
Kenwood DDX9903S, Arc PS-8 w/PSC, Arc Audio 1200.6, Helix SPXL1000, Audiofrog GB12D4(2) IB, GB60, GB25, GB10