My Polaris RZR XP1000

[JP Fabrication]

I just picked up a used '14 XP1000. Goodies it came with, CarrOne Worcs cage, Nelson and Nelson front arms with sway bar/bumper, full Muzzy's exhaust with controller, and chromolly radius rods with heims.


As with my two previous RZR builds I start off by relocating the instrument cluster to where I think it should be.

[JP Fabrication]

Lighting, 40" and 20" Totron Cree.
36" Rear led light bar with amber strobes

[JP Fabrication]

Light bar tabs welded in, single intrusion bar cut out, replaced with A bars and window net tabs cut off.

[JP Fabrication]

[JP Fabrication]

[JP Fabrication]

For the sound system I will be using some new equipment, everything from my XP900, and some stuff I have laying around collecting dust.

ALPINE EX-10-ipod interface with screen and remote
Audio Control Three.2 EQ
ALPINE PDX-V9 5ch amp biamped to ALPINE SPX-REF 6 1/2" componets+JL 10W3v3-2
ALPINE PDX-2.150 amp 2ch to ALPINE SPX-17MB 6 1/2" midbass
ALPINE PDX-M600 sub amp to JL 10W3v3-2
SSV WORKS Glove box sub enclosure
SSV WORKS behind seat sub enclosure





After some cutting, the rear led light bar fits perfect in the roof skin.

[JP Fabrication]

[JP Fabrication]

[JP Fabrication]

Fabbing the headliner, recycling my modified overhead Chevy console from my first RZR build. This cage has no radius so I had to grind down and clean up where it meets the headliner using Marglass, then ready to be wrapped with black suede.

[JP Fabrication]

Almost ready for stage 2 of the dash