This is a build I completed in October of 2017 and competed with at MECA/IASCA Finals in Louisville that year. I created this build thread on DIYMA so I'll just cut and paste it here over the course of a week or two.
This is a build I completed in October of 2017 and competed with at MECA/IASCA Finals in Louisville that year. I created this build thread on DIYMA so I'll just cut and paste it here over the course of a week or two.
2007 Dodge Magnum SRT8|Custom Panny TX5500W Bottlehead|Zapco HDSP-Z16V DSP|HAT Legatia X and SE front stage|HAT C12 Subs|Zapco Z-AP amps
1967 Mercedes 250S|Panny VX5500|Helix DSP|HAT Legatia SE and Clarus front stage|HAT C15 sub|Zapco Z-LX amps
The equipment list for this car is:
Highly modified Panny Bottlehead (Panasonic CQ-TX5500W)
Helix DSP
A pair of Zapco Z-150.4LX amps for the 3-way front stage and a 1k amp for the sub
Hybrid Audio Technologies L1R2 tweets, L3SE mids, Clarus C6 midbass and a single Clarus C15 sub
2007 Dodge Magnum SRT8|Custom Panny TX5500W Bottlehead|Zapco HDSP-Z16V DSP|HAT Legatia X and SE front stage|HAT C12 Subs|Zapco Z-AP amps
1967 Mercedes 250S|Panny VX5500|Helix DSP|HAT Legatia SE and Clarus front stage|HAT C15 sub|Zapco Z-LX amps
Classy!
That is one, beautiful, German classic!!!
2019 Jeep Wrangler 2 Door - Morel Elate 3 way, Mmats HiFi 6150 & M2000.2, Hutchinson NDFEB 10", MiniDSP w/DL, Fiio X5
#TRUMP2020
The original build thread started on June 5th 2017. I'm just going to cut and paste.
"Yesterday I started on the console that will house the Panny double DIN HU. This will eventually flow thru into a center console between the two front seats. This HU console is similar to one I just built for the other '67 Benz that is in my shop. That one belongs to a good buddy of mine....same year, model, exterior body color but with black interior instead of blue like mine. I will be changing mine to black as well. Not a fan of the blue at all."
2007 Dodge Magnum SRT8|Custom Panny TX5500W Bottlehead|Zapco HDSP-Z16V DSP|HAT Legatia X and SE front stage|HAT C12 Subs|Zapco Z-AP amps
1967 Mercedes 250S|Panny VX5500|Helix DSP|HAT Legatia SE and Clarus front stage|HAT C15 sub|Zapco Z-LX amps
Next I needed to play around on the router table in order to make it hollow on the inside after the MDF panels get stacked.
2007 Dodge Magnum SRT8|Custom Panny TX5500W Bottlehead|Zapco HDSP-Z16V DSP|HAT Legatia X and SE front stage|HAT C12 Subs|Zapco Z-AP amps
1967 Mercedes 250S|Panny VX5500|Helix DSP|HAT Legatia SE and Clarus front stage|HAT C15 sub|Zapco Z-LX amps
I then used this piece as a guide to make the next one a little thicker. Once that one was finished I then duplicated that part until I had the correct width for the HU.
2007 Dodge Magnum SRT8|Custom Panny TX5500W Bottlehead|Zapco HDSP-Z16V DSP|HAT Legatia X and SE front stage|HAT C12 Subs|Zapco Z-AP amps
1967 Mercedes 250S|Panny VX5500|Helix DSP|HAT Legatia SE and Clarus front stage|HAT C15 sub|Zapco Z-LX amps
2007 Dodge Magnum SRT8|Custom Panny TX5500W Bottlehead|Zapco HDSP-Z16V DSP|HAT Legatia X and SE front stage|HAT C12 Subs|Zapco Z-AP amps
1967 Mercedes 250S|Panny VX5500|Helix DSP|HAT Legatia SE and Clarus front stage|HAT C15 sub|Zapco Z-LX amps
2007 Dodge Magnum SRT8|Custom Panny TX5500W Bottlehead|Zapco HDSP-Z16V DSP|HAT Legatia X and SE front stage|HAT C12 Subs|Zapco Z-AP amps
1967 Mercedes 250S|Panny VX5500|Helix DSP|HAT Legatia SE and Clarus front stage|HAT C15 sub|Zapco Z-LX amps
2007 Dodge Magnum SRT8|Custom Panny TX5500W Bottlehead|Zapco HDSP-Z16V DSP|HAT Legatia X and SE front stage|HAT C12 Subs|Zapco Z-AP amps
1967 Mercedes 250S|Panny VX5500|Helix DSP|HAT Legatia SE and Clarus front stage|HAT C15 sub|Zapco Z-LX amps