Just keep in mind you don't want your response flat and it's normal for your ears to want a wide-ish cut centered around 250. And of course the ol slope down starting around 10k, and a cut in the 2000 range also for that matter.
Printable View
Just keep in mind you don't want your response flat and it's normal for your ears to want a wide-ish cut centered around 250. And of course the ol slope down starting around 10k, and a cut in the 2000 range also for that matter.
Unfortunately, I'll be driving through there, literally, on the 14th.
Ya that was pre "ear tune" I tried to follow Jazzi's house curve and for the most part it hit it within a couple db's along the curve. I further got it to follow the curve and with the ear tune it follows more of what your stating. Wish I could measure it but still cant seem to get it work correctly. I still have decent cut in the 300-500 range and some cuts up near 5k or so to clean up the vocals.
Unfortunately can't utilize the max potential of the midbass as I get a issue popping up with chuffing from the port and. It isn't port area being the issue I feel it's the closeness of the port to the enclosure walls causing the issue. It is quite tight. It's a .3 cu ft enclosure with a 2" port tuned to near 83hz give or take a couple hz. Haven't gotten around to it but plan to do a test enclosure with similar specs to see if it is actually a issue with the port sizing or something else.
Make a pit stop :D
Getting really excited to see everyone and listen to some vehicles. I plan on being there at 8 as i want to make sure I get my items ordered early so I know they will still have them as well as get in on some drawings. They tend to go quick and very early. I will have my measuring equipment with me as Jazzi and I are going to try and figure out my issues I've been having with the testing setup. Assuming we can get things to work I'll be glad to let anyone borrow the setup if they want to pick Jazzi's brain a little lol
Weather looks to be really good. Low 80's and little chance of rain. Make sure to bring some chairs, sunscreen if you susceptible to burning. Once again food and drink are provided by PE and past events it was donation based. I will have my camera with me and at some point would like to get a group shot of those attending.
I will have my yeti 400 and my homemade 5v power bank for anyone who may need to charge phones or other simple devices.
See you all tomorrow:cool:
Glade news. Was able to figure out what was going on with REW and my mic.
1) The RCA to 3.5mm I have is bad/pinched. Get some mad noise from it.
2) REW was way outdated. I never updated to v5.18. Was still on v5.1
So I redid everything as REW supports auto eq with the 3.Sixty.3 which the previous tune didn't have that option. I had to guess
It will still be fairly raw for tomorrow but hopefully with some feedback and some slight adjustments things can get worked out.
Warning now just in case I don't say anything about it tomorrow. I do have quite the noise floor.
Here are some measurements:
Full System
http://i.imgur.com/1bqmUCp.jpg
Full System Crossovers
http://i.imgur.com/AQo8b6S.jpg
Mid Bass
http://i.imgur.com/h5KFz6X.jpg
Full Range
http://i.imgur.com/CkgXZE2.jpg
Had to mess with the subs LPF crossover as with the ported mids the tuning of the enclosure is around 83Hz and the drivers fall off after that. I have them crossed at 50hz as it does help bring the bass more up front. So have the subs set for 80hz which helped fill the gap a little.
Anyway am pleased with the sound. Can play just about any genre for the most part.