In order to remove the headliner you have to remove everything except the dash, front seats, lower rear seats, and center console.
Printable View
Lol, love that sig.....
More progress, unfortunately I ran out of deadener. I'll order some more and hopefully finish it next week.
Amazingly enough, I got the headliner back in too. :) Now I just have to get everything else back in.
https://uploads.tapatalk-cdn.com/201...6abd6d38c5.jpg
https://uploads.tapatalk-cdn.com/201...65845f36be.jpg
https://uploads.tapatalk-cdn.com/201...f2f450ade3.jpg
https://uploads.tapatalk-cdn.com/201...08119d9b0c.jpg
Almost done...
https://uploads.tapatalk-cdn.com/201...97b6797217.jpg
Weekend plan:
Build sub enclosure. I may not be able to finish it. Plexiglass was supposed to ship on Tuesday but I haven't received any tracking information.
Mock up amp placement so I can get the cable lengths so Joseph can build my RCA cables.
Hopefully finish up sound deadening on the floor and B-pillars.
In the mean time, Ed Rice and Darin Laughard are working on something special for under the hood.
I had big plans for this weekend, then my helper Murphy stopped by and he brought all of his laws with him. What should have taken a few hours ended up taking all weekend.
Enclosure pieces cut and primed.
http://i18.photobucket.com/albums/b1...psaojxrtvt.jpg
Boot covered in man glitter.
http://i18.photobucket.com/albums/b1...psn3i9cbst.jpg
I'm doing a double front baffle with the T-nuts on the outer piece. Due to that I had to counter sink them a little. Obviously my free hand router skills are lacking.
http://i18.photobucket.com/albums/b1...psm6yj9rk5.jpg
http://i18.photobucket.com/albums/b1...pswdngvmfr.jpg
Since I am using plexiglass I decided to use screws instead of brads. I didn't want to take a chance on missing with the brads and messing up the inside of the box.
http://i18.photobucket.com/albums/b1...psucuurkyq.jpg
All screws pre-drilled and countersunk.
http://i18.photobucket.com/albums/b1...psurv8knhk.jpg
Second baffle applied.
http://i18.photobucket.com/albums/b1...pss30uqo5g.jpg
All seams were then giving a coating of fiberglass resin inside and out to make sure the box is completely sealed.
http://i18.photobucket.com/albums/b1...pskfiferxf.jpg
I then painted it and it looked like crap.
http://i18.photobucket.com/albums/b1...ps9utn3sav.jpg
So, I decided to paint it with SEM textured black paint. Unfortunately, it once again looked like crap.
http://i18.photobucket.com/albums/b1...psvk5o7i2j.jpg
After that I called it a day. Then this morning I went to Lowe's to get more sandpaper and more paint. I spent about two hours sanding it down. After I sanded it down I applied a think layer of bondo over the entire inside of the box to get it as smooth as possible. I then sanded it down, again.
http://i18.photobucket.com/albums/b1...ps2tzastkt.jpg
http://i18.photobucket.com/albums/b1...pseo0bwxkj.jpg
After all that was done I applied three or four layers of primer. I then had to add a little more bondo to fix a couple of spots but I didn't photo that. I then primed it again, then added three or four coats of Satin White paint followed by a few coats of clear coat. I still need to touch up the black but that will just take a few minutes. Now I just have to wait for the plexi to be delivered.
http://i18.photobucket.com/albums/b1...pssntsy8jg.jpg
I guess I won't have an excuse not to get some work done this weekend. Speaker binding posts and banana plugs arrived today from MCM. Plexiglass arrived from Mr. Plastic (better late than never). I picked up a sheet of both 1/2" and 3/4" MDF from Lowes. Black Hole Tiles arrived as well. On top of that $100 worth of techflex shipped from Cable Ties and More. The paint marker should arrive from Amazon tomorrow to touch up the black on the speaker box.
Hopefully I can finish the enclosure up on Friday then work on amp racks Saturday and Sunday. I also plan to get all of my measurements for cables so I can get them to Joseph Davis on Monday.
One additional bonus, I go back to the doctor tomorrow. Fingers are crossed I get rid of the boot / air cast. Three months is long enough.
Worked a couple of hours this evening. I started by covering the front of the enclosure in beige vinyl. Next I used a round over bit on the plexiglass. Then I did a really crappy job of trimming the plexi on one side to allow room for the LED's. After that I cut out the holes on the outer trim piece. I removed a little from the back to allow room for vinyl and chamfered the front. I will cover it tomorrow. I did a test with the LED's after I finished up.
https://uploads.tapatalk-cdn.com/201...04ec2d7dc6.jpg
https://uploads.tapatalk-cdn.com/201...75475e919a.jpg
https://uploads.tapatalk-cdn.com/201...d94858b396.jpg
https://uploads.tapatalk-cdn.com/201...e2fd6da954.jpg