Re: Zuki Eleets questions
Quote:
Originally Posted by
Hic
Nice beak81champ,
TBI HDSS tweeters ! ( Very Nice )
https://www.youtube.com/watch?v=vWx_ztYzyXo
I hope you get the full-size Blazer !
the Sundown SA-8's . . .
https://www.youtube.com/watch?v=kjgu-qaJARk . . . would work in a nicely built box _-_-
https://www.ebay.com/itm/STAGE-3-DUA...!-1:rk:35:pf:0 $164.22
The Stage 3 comes with a wide range of features which where designed to get the most out off your subwoofer.
2" front baffle which provides an exceptionally strong mounting surface for the subwoofer.
1" American MDF construction for superior structural strength.
45° supports to smooth out airflow and reduce turbulence.
Custom vertical bracing system (VBS) to prevent enclosure distortion and wall flexion.
Gold plated terminal cups to increase electrical conductivity and reduce harmonic distortion.
The MB8 from 200 Hz and up would work ! With 8 ohms of resistance , maybe an amp that makes it's power ( say 200 W into 4 ohms ) will give about half that into 8 ohms.
https://www.massiveaudio.com/product...-range-speaker
It hopefully turns out to be just what you want !
The MB8 I have are 2 ohm drivers
Re: Zuki Eleets questions
Re: Zuki Eleets questions
Quote:
Originally Posted by
beak81champ
The MB8 I have are 2 ohm drivers
Your other amps will power those
Re: Zuki Eleets questions
Quote:
Originally Posted by
Hic
Your other amps will power those
I’m assuming that, since the box says 5w @ .005thd @ 4ohms, and 10w @ .005thd @ 2ohms, that these 4 channels are safe to run at 2 ohms if I need them to???
Re: Zuki Eleets questions
1 XDI 600.4 bridged on each pair of eights !
TrIdiot uses 4 mids, then if you get a Tone Tubby sub from a brounsoun.
A Zuki 100 watt mono will run AlNiCo magnet @ 8 ohm or 16 ohm without a problem!