2005 BMW Mustang

To start, see my name. I'm in denial about owning a ford but i love my mustang....also E36 BMW's.
Not gonna lie, or pic dump, my FULL (and boy is it full) log is on the "other" site under the same username.

Initial setup
JVC-KW350BT
SoundStream RN4.1400D
Kenwood Excelon XR600.1 (swapped with a Mercury C800)
Focal ES165KX2 passive crossovers
db Audio PRO6K
Kicker KS693
Diamond Audio TDX10D4
Knukonceptz Kolossus 1/0 power/ground
db Link 10ga speaker wire
Metra rca's
db Link main fuse block
Recoil BBPG5 busbar (bridged)
Shuriken busbar
Raptor inline MANL fuse holders to amps

2nd setup
JVC KW-350BT (remote turn-on for amps only)
ACX-BT1 bluetooth module
Helix M4 DSP (for tweeters and midwoofers)
2x Soundstream D100ii (for midbasses)
Soundstream Reference 1000SX
CDT DRT-20 tweeters
Diamond Audio Hex s6.0m midwoofers
Kicker 48CWRT672 (4ohm version wired to 2ohm)
Diamond Audio M612d4 subwoofer (wired to 2ohm)/Adire 12KH501d2 (wired to 1ohm)
*swapped db Link main fuse with 100A breaker

2.5 setup
Swapped DA Hex s6.0m w/ PHD FB6.1
Added 96ah LifePo4 bank

3rd setup
ACX BT1
Arc Audio PS8-50
Scanspeak D3004/6020-00
PHD FB6.1
Soundstream 1000sx
Adire 12KH501d2 (same box)

Current setup being installed
ACX BT1
Arc Audio PS8-50
Scanspeak D3004/6020-00
Scanspeak 18M/4631T00
Salt 200.2
JBL GTO804 (x2) (box tbd)

Gonna repeat a pic, but my current goal is to hide my system....because i'm bored. Lol

Amps are going in a trunk corner and the distro block and speaker terminal strip are going along the trunk wall i made.
These will be hidden by carpeted panels.

Subs are going in the back seat area and will be made to look like they're part of the angled panel i'm wrapping and installing. The "seat" will be hinged and lined with padding to use as storage area. This is a tiny mustang after all.

I moved the tweeter pods from the windshield side of the A pillars to the door side and pointed them at a midpoint between the shoulders of each seat, which makes the driver side a skitch off axis and the passenger side ~15⁰ off axis. Guess who's gonna learn phase?

Can't find my fcking full-thread, countersunk 1/4-20 bolts so ignore the spacers on the long-azz bolts in the middle. Gonna wrap the entire seat area once i decide on black or charcoal carpet.

Hinged the bottom area for some storage after i clean it out and add some padding material and block off the corner where i have my isolater from the lithium bank (on the back of the 2x4 on the passenger side). Call it a failsafe so i know the power to my amps is dead.

Bets on the reinforcing capability of JB Weld? Doing this experiment because it's free materials. Metal is from a tore-up DVR case i saved because you never know.

Just got my Scanspeak 18M4631T00 Revelator midbasses in yesterday, so of course i spent last night installing them 🤣

These things blow all the "high end" speakers i've heard out of the water...except the Illuminators, those are pure gold.