Re: 2011 Dodge Challenger
That's pretty slick. I don't think I've seen a TL in real life...nice job.
Re: 2011 Dodge Challenger
Very interesting for sure, so sub forward, but port exits up into the factory subwoofer location? Too cool!
Re: 2011 Dodge Challenger
Excellent ! :D
Are the stuffins wool ? Etc..,
Re: 2011 Dodge Challenger
Thank you guys. I have all of the pics for the completed trunk, amp racks and such. The pics just weren't cooperating earlier. I'll try again in a few when I get a sec.
Traditionally tlines do have stuffing, this one does not. It does nave 45's in the corners and was painted white and many other colors. The line is also about 18 inches short, which put the tuned freq at 36. It will play well up to about 70 and can play down to about 28 or so. I use the crossover points on the deck to act as a SS filter since the amp doesn't have one.
This box started as an experiment to see what I could do for next to nothing. The wood was a recycled desk unit made from 3/4 MDF that I found on Craigslist for free. The window side is MDF with a layer of plywood that was free. The 1/2 inch plexi was from a recycled printer stand that was free. The lighting cost $5 on ebay and I did the whole trunk with it. The later parts of the build ended up costing and the Sundown sub in it now was bought new.
Re: 2011 Dodge Challenger
Quote:
Originally Posted by
chithead
Very interesting for sure, so sub forward, but port exits up into the factory subwoofer location? Too cool!
I had the port facing forward and got terrible cancellation.
Re: 2011 Dodge Challenger
Quote:
Originally Posted by
BigAl205
That's pretty slick. I don't think I've seen a TL in real life...nice job.
Thank you. You may want one if you hear one. They do take a ton of space though.
Re: 2011 Dodge Challenger
Here are the build pics of the amp racks. There is one on each side of the car. The passenger side has the Pioneer GM-D8601 and the driver side has the RF r250.4. Pics are for the sub amp, but both are built the same.
https://i.imgur.com/mrhhyny.jpg
https://i.imgur.com/DSugJg9.jpg
https://i.imgur.com/EZYyXfG.jpg
https://i.imgur.com/vF9GcgM.jpg
https://i.imgur.com/kNBUmvU.jpg
Re: 2011 Dodge Challenger
Next was wallling off the trunk. The port is no longer on the front of the box and the PPI sub is gone with a Sundown in it's place. There was a lot of experimenting on getting this to work like I wanted.
https://i.imgur.com/Tnigpjk.jpg?2
https://i.imgur.com/ppNrVLf.jpg?1
https://i.imgur.com/gGyJjXp.jpg?1
https://i.imgur.com/dyJyiDS.jpg
The Sundown as it sits today
https://i.imgur.com/Bm7tWF9.jpg
Re: 2011 Dodge Challenger
The back of that box is super ugly sitting there, so a vanity panel was next. I made the frame and stretched fleece, then fiberglassed it. It has magnets that hold to L brackets on the side of the box.
https://i.imgur.com/7iaSf4R.jpg?1
https://i.imgur.com/9BgOxUu.jpg?1
https://i.imgur.com/VBAoc75.jpg?1
https://i.imgur.com/gF2iShH.jpg
https://i.imgur.com/5dc2jmI.jpg
And finally the moment it took about 2-3 months to arrive at..
https://i.imgur.com/Dt3wDWh.jpg
https://i.imgur.com/wldtQz4.jpg
https://i.imgur.com/bPKFZEq.jpg