-
2 Attachment(s)
Hello from Florida
Hello everyone, I found this forum while looking for help on my first car stereo build in 20 years. I am currently looking to put a JL Audio-8W7AE-3 in my 1996 BMW 328ic. My car has a ski-pass between the rear seats that is 10" x 10" and opens into the trunk. I am hoping I can build a box to spec for the 8W7AE-3 so it can sit in that opening. So here is to finding ways to make my Bimmer a Boomer lol. Thanks for having me. (I just noticed I misspelt BMW in my member name... I am not off to a good start)
Attachment 6299Attachment 6300
-
Re: Hello from Florida
-
Re: Hello from Florida
-
Re: Hello from Florida
BMW 36 CABRIOLET
A sealed enclosure that adheres to JL's specifications is below. Volume = 0.875 cu ft
10 inch by 10 inch by 20 and 3/4 inch with 3/4 inch board all around will give you an
"ear to ear grin".
Qtc 0.797
Fc 46.0 Hz
F3 41.3 Hz
Welcome to CarAudioJunkies :goodpost:
https://m.ebay.com/itm/STAGE-2-SEALE...MAAOSwWHBZ6V43
The box in pic shows a support brace for her motor , ass , butt
, takes the weight off of faceboard ^ ^ ^ ^
-
Re: Hello from Florida
Welcome from a flellow Floridian!
Al runs a great shop here!
-
Re: Hello from Florida
-
Re: Hello from Florida
Welcome to the loony bin!
-
Re: Hello from Florida
BMW36Cabrolet,
How did box work out for you ?
http://www.insideedition.com/extreme...ng-video-39892
Take the Plunge