Re: 2012 Charger - Veronica
Re: 2012 Charger - Veronica
This is looking sweeet. I'll second Al's comment about welding.
Re: 2012 Charger - Veronica
Got some more midbass baffle work done. Here you can see the 8 mocked up in the driver side baffle with the grill frame in place
http://farm8.staticflickr.com/7368/1...202e50e9_b.jpg
The space between the driver and grill frame will be filled with a plexi insert that will cover the driver mounting flange and another piece that covers the LEDs that will light up the plexi :)
The frame has about an 1/8" routed out in it for the actual grill, which will be expanded steel.
I also got the magnets in the frame and baffle in place. I intended to glue/epoxy them in, but when I trial fit one I couldn't get it back out :twitch: Even using another magnet it didn't want to come out. press fit FTW... So, I put them all in.
http://farm4.staticflickr.com/3826/1...caf026f1_b.jpg
http://farm8.staticflickr.com/7444/1...5232beae_b.jpg
View of the baffle and the grill frame
http://farm8.staticflickr.com/7338/1...f9d3e11d_b.jpg
Hard to tell here, but I'm holding this off the table, showing the magnets hold fairly well.
http://farm8.staticflickr.com/7337/1...05023e07_b.jpg
I still have some routing work on the baffle and frame to do but I'm going to wait until my new router, table and lift come in early next week. It was a good excuse to buy some new tools :)
Re: 2012 Charger - Veronica
The baffles are for the kicks? I'm interested to see how they fit.
Re: 2012 Charger - Veronica
Quote:
Originally Posted by
papacueball
The baffles are for the kicks? I'm interested to see how they fit.
Yes. I only have the one baffle so far. I thought I posted a pic of the mockup I did, but I haven't. So here are a few I just uploaded:
http://farm4.staticflickr.com/3732/1...46f713fd_b.jpg
http://farm8.staticflickr.com/7396/1...6a2073f6_b.jpg
As you can see, the carpet section is where the baffle will extend. The dead pedal will be remain so as to appear stock-ish.
Here is the cardboard template I started with. This is the same size as the baffle in the previous pics. So you can see how much of the driver will be covered up here; almost half of it actually.
http://farm4.staticflickr.com/3716/1...34b03a6a_b.jpg
In the previous pics you see where the baffle is notched in two places on one side. That is to clear the factory wiring harness and the e-brake cable, so the baffle can extend to the kick panel wall. It just so happens that the depth works out nicely so the pedals, which are motorized/adjustable in my car, can extend back as far as possible and still clear. So basically no way you an slam the brake and hit the grill. I never drive with them that far back however, my legs aren't that long :)
Hope that helps!
Re: 2012 Charger - Veronica
Are you going to keep some semblace of a dead pedal, or will you cut more of the carpet out later?
Re: 2012 Charger - Veronica
good question, yes :)
That pad will be removed, but put on to the new grill piece. That was the main reason for extending the baffle all the way to the kick panel wall, so I could keep a place to put my foot. It will be reinforced, hopefully, so I can crush it, but it will be there. The goal will be to have it look as factory as possible so it doesn't just stand right out that it was replaced.
of course seeing it extended to just behind the brake is a giveaway, but you'd have to look to see it, as opposed to say a 'traditional' kick panel build where it is all nicely done in vinyl and all that.
Re: 2012 Charger - Veronica
Interesting. Honestly I prefer the way you are doing the kick for the midbass, looks like it would allow for a larger driver and it's a bit of a departure from the norm.
Re: 2012 Charger - Veronica
thanks. If it weren't for the showy led/plexi setup, I could easy fit a 10 in here. The depth of the foot well is kind of shocking. There is an easy 6" behind the pedals and if I moved the forward, a couple more. If one got creative, they could even do a sealed enclosure of about half a cubic foot if they wanted. It was tempting to put a pair of JL 10TW3's in the front :)
Re: 2012 Charger - Veronica
Nothing wrong with a little flash on top of a solid setup.