Re: PASMAG Amplifier Reviews.
I'd say that's close enough to call it a wash. Pick the one you like the looks of :p
Sent from a rotary telephone
Re: PASMAG Amplifier Reviews.
Quote:
Originally Posted by
benny
I'd say that's close enough to call it a wash. Pick the one you like the looks of :p
Sent from a rotary telephone
The PPI is almost $100 cheaper, so I have to say the PPI is a bit more impressive. Though I do agree, either one it pretty good.
1 Attachment(s)
Re: PASMAG Amplifier Reviews.
Now for an amp from a manufacturer that has a long history of producing massive amounts of power but in recent years has been looked at with some apprehension.
Orion XTR3700.1D Amplifier. Orion really needs to update their site since the recent buyout, seeing as everything they currently list is either out of production or being replaced.
Attachment 1015
Chanels |
1 |
Class |
D |
RMS Power Rating |
4 ohms: 1500 watts x 1 chan
2 ohms: 2500 watts x 1 chan
1 ohms: 3700 watts x 1 chan |
THD at Rated Power |
0.5% |
Dimensions |
9-5/16"D x 19-7/16"L x 2-1/2"H |
PASMAG Full Review
Measures Performance Specifications:
Manufacturers Rated Power
1500 x 1 @ 4 Ohms
2500 x 1 @ 2 Ohms
3700 x 1 @ 1 Ohms
Actual Measured Power @ 1.0 % THD+N and @ 12.6 V Battery
1310 x 1 @ 4 Ohms
2205 x 1 @ 2 Ohms
3192 x 1 @ 1 Ohms
Actual Measured Power @ 1.0 % THD+N and @ 14.4 V Battery
1703 x 1 @ 4 Ohms
2857 x 1 @ 2 Ohms
4090 x 1 @ 1 Ohms
Maximum Current @ full power, lowest rated impedance: 413.6 A
Overall I have to say if this is what a current Orion Class D mono amp can do I want to see what their Class A/B 2 and 4 channels can do.
Re: PASMAG Amplifier Reviews.
A 30% increase in wattage just by upping the input voltage by 1.8V! That's definitely not a regulated PSM. :D
Re: PASMAG Amplifier Reviews.
You got that right, it's also something that's very inspiring to see from a brand that has seemingly been on a large downturn for the past decade.
Re: PASMAG Amplifier Reviews.
I love the old school Orions, though never owned one myself. Let's hope these new models have good quality and no reliability issues.
1 Attachment(s)
Re: PASMAG Amplifier Reviews.
It's been a while since I posted anything so...
Memphis Car Audio MJ1.2200 Amplifier
Attachment 1440
RMS POWER @ 4ohms |
550 X 1 |
RMS POWER @ 2ohms |
1100 X 1 |
RMS POWER @ 1ohm |
2200 X 1 |
THD% @ 4ohms |
.03% |
Frequency Response |
20Hz - 250kHz |
DIMENSIONS (7.77"d x 2.24"h x) |
20.6" |
FULL PASMAG REVIEW
Manufacturers Rated Power
800 x 1 @ 4 Ohms
1500 x 1 @ 2 Ohms
2200 x 1 @ 1 Ohms
Actual Measured Power @ 1.0 % THD+N @ 12.6 V Battery
735 x 1 @ 4 Ohms
1290 x 1 @ 2 Ohms
1947 x 1 @ 1 Ohms
Actual Measured Power @ 1.0 % THD+N @ 14.4 V Battery
960 x 1 @ 4 Ohms
1683 x 1 @ 2 Ohms
2600 x 1 @ 1 Ohms
Maximum Current @ full power, lowest rated impedance 244.5 A
Never really been a Memphis Audio fan but I have to say this looks like a solid amp.
1 Attachment(s)
Re: PASMAG Amplifier Reviews.
A couple of pages back Fric said he'd like to see one for his Phoenix Gold Ti1600.5, sadly PASMAG hasn't reviewed it but they did review the Ti2 800.1. Let's see what kind of amp PG is putting their name on these days.
Phoenix Gold TI2 800.1
Attachment 1441
Class |
D |
Channels |
1/Mono |
POWER RATING at 2Ω |
600 Watts x 1 |
POWER RATING at 1Ω |
800 Watts x 1 |
SIGNAL TO NOISE RATIO |
>90dB |
LOW PASS RANGE |
30Hz to 200Hz |
LOW PASS SLOPE |
24dB/Octave |
SUBSONIC RANGE |
10Hz to 55Hz |
SUBSONIC FILTER SLOPE |
48dB/Octave |
DIMENSIONS |
11.7" L x 7.1" W x 2.0" H |
FULL PASMAG REVIEW
Measured Performance Specifications
Manufacturers Rated Power
400 x 1 @ 4 Ohms (not listed on site)
600 x 1 @ 2 Ohms
800 x 1 @ 1 Ohms
Actual Measured Power @ 1.0 % THD+N @ 12.6 V Battery
380 x 1 @ 4 Ohms
641 x 1 @ 2 Ohms
920 x 1 @ 1 Ohms
Actual Measured Power @ 1.0 % THD+N @ 14.4 V Battery
496 x 1 @ 4 Ohms
847 x 1 @ 2 Ohms
1230 x 1 @ 1 Ohms
Maximum Efficiency at full 2 ohms power per ch. 86.3 %
Re: PASMAG Amplifier Reviews.
I wonder if that's the same board that's in my 1600.5. Can't imagine it would be much different.
Sent from my Springfield XD with love!
Re: PASMAG Amplifier Reviews.
Isn't yours the previous gen Ti? Those were hybrid Class A/B and D (channels 1-4 were Class A/B and the sub channel was Class D) so the sub section is probably the same.