Re: Mercedes C AMG 63 - Focal Utopia MW 3,5 pillars mde by LBaudio
Quote:
Originally Posted by
JayinMI
I love your work. This has me thinking...I'm building a car for next year. Right now it's in bodywork and paint.
Stycker...you should see some of his older work. I think it was a Peugot? IIRC he had ported enclosures in the doors and ran a tube through his pillars/sails for the window defroster. They were pretty involved! lol
Jay
Thanks Jay for a nice words!
that car you are talking about was Alfa Romeo 147….
here is the link… if not appropriate please delete
https://www.diymobileaudio.com/threa.../#post-2162320
Re: Mercedes C AMG 63 - Focal Utopia MW 3,5 pillars mde by LBaudio
Quote:
Originally Posted by
dumdum
That was his own Alfa ���� I think there’s a build log somewhere
I only posted start of install in new Alfa Romeo GT… different pillars, same doorpanels
Re: Mercedes C AMG 63 - Focal Utopia MW 3,5 pillars mde by LBaudio
Quote:
Originally Posted by
dumdum
That was his own Alfa ���� I think there’s a build log somewhere
I know it's on DIYMA somewhere. We don't have Peugeot here, and didn't have Alfa's when he built it. lol
It's been a minute since I've been on DIYMA.
Jay
Re: Mercedes C AMG 63 - Focal Utopia MW 3,5 pillars mde by LBaudio
heres a few pics of some final touches to the pillars - added Silent Coat damping material on back side of the pillar and covered it with fabrics, also a thin layer of Brax paste was added inside of panels - thin because there was almost no space due to needed magnet clearance. There were also added strips of neoprene to decouple insert from the pillar, Neoprene strip was added to the speaker ring too. everything packed up and ready to ship. Heres a last few pics:
Silent Coat damping on the back of pillar, covered with fabrics
https://i.imgur.com/C1VnYi3.jpg
https://i.imgur.com/XffXEUa.jpg
Sealant/decoupler - a thin stripe of neoprene was added on the back side of the insert to decouple insert from pillar, to seal it,....
https://i.imgur.com/XQsFSWX.jpg
a small ammount of BRAX ExVibration paste was added to the inside of the panel among with some other damping materials
https://i.imgur.com/vqcTxCE.jpg
https://i.imgur.com/ygFUQ84.jpg
https://i.imgur.com/hSatLhR.jpg
https://i.imgur.com/CRTDf1H.jpg
Everything packed and ready to ship
https://i.imgur.com/JLnCOIG.jpg?1