2004 Evo VIII RS

Here is my last car build. This car has had this system since 2004 and is pretty old school like me.

standard Din JVC head unit that was a DV player and had an optical output. The front stage were the best of the group of speakers I tested for Zapco when they were launching components. They are ESB drivers.

Attachment 17192Attachment 17193
The tweeters are mounted to the A pillars and the trim panel just surrounds it. The acrylic rod illuminates just to match the effect of the kick pane grille but the tweeter grilles were left on.


Attachment 17194Attachment 17195
The kick panels are built the same way. The panel is just trim and the speaker itself is mounted to a 1/4" steel plate and vented into the sill.


Attachment 17196
The sub is an Illusion Audio ND15 mounted free air. Its mounted on an steel baffle that is welded, bolted and glassed where needed to ensure its sealed off between the cain and trunk area. The trunk is bare because the RS version doesn't come with trunk interior to reduce weight. There were 500 built like this for WRC homologation, so I went with that theme.

Attachment 17197Attachment 17199
The amplifiers are A Zapco Z250C4 that was balanced and re-biased for the front stage and a 500.1 for the sub. They are built into 4G63 valve covers with AEM oil caps and cam gears for effect. Processing is done with a Zapco DSP-6. They are mounted on an Aluminum rack that uses the rear brace mounts the RS comes with and tapped plates welded to the floor.
Behind that is a 2qt Accusump setup.

Attachment 17198
the battery is relocated to the trunk and in a custom aluminum box. The fuse/distribution sits above it. In the corner of the sub baffle is a secondary fuse panel which has constant power for accessories like the Accusump, meth, motorization, etc. There is also one on the passenger side that has switched power.

Attachment 17200
Here's a shot of the engine bay if anyone is into the performance side of things...

Do you have any pics of the car itself?

Here's a few, I think I have some from SBN with the motorized trunk somewhere before I changed suspension and corner balanced the car.
Attachment 17201Rear, VIS CF trunk with Kaminari CF wing. I have original trunk that didn't come with a wing
Attachment 17202 I made an air guide in the bumper for the larger Oil Cooler
Attachment 17203 Profile on Volk LE37T
Attachment 17204Front view, the intercooler is vertical from a Full Race kit. Reduced a lot of pipe and spools really fast.

I found an older dyno chart if your interested in the performance side. Latest tune put it at 520HP / 525TQ @28PSI after break in with 50/50 Meth.
Attachment 17205

This car is the exact opposite of the car I'm building now. my Mirage has a 1.2 3cyl and makes 78HP / 74TQ but it's MUCH EASIER to hear the stereo over the engine and exhaust noise.