Re: Helix Director Encoder
Last fall my Director encoder started to go while it was still under warranty (lucky!). From what I recall, the guy at MSC told me they were going to replace the encoder but found that it was soldered to the main board. So they ended up giving me an entirely new Director.
If you're decent at desoldering/soldering it's probably still doable (assuming it's through-hole and not surface-mount). But I don't know how you'd source the part if ATF and MSC won't help you out...
Re: Helix Director Encoder
Unfortunately mine is not under warranty so was just trying to get the part and have a computer repair guy or such replace it for me… We’ll see. Appreciate your input!
Re: Helix Director Encoder
Quote:
Originally Posted by
goatpanda
Last fall my Director encoder started to go while it was still under warranty (lucky!). From what I recall, the guy at MSC told me they were going to replace the encoder but found that it was soldered to the main board. So they ended up giving me an entirely new Director.
If you're decent at desoldering/soldering it's probably still doable (assuming it's through-hole and not surface-mount). But I don't know how you'd source the part if ATF and MSC won't help you out...
its surface mount, 5 electrical soldered connections and maybe some extra legs for stability, hopefully the conductor isn’t the same rotary encoder and it lasts a fair while longer
they are a bitch to remove, cutting the existing encoder apart is the easiest method, then one you have the contacts as singles you can then unsolder each ‘leg’ and remove all traces from the board and put a new one on
Re: Helix Director Encoder
Ooof that sucks. Not impossible, but as you said that would be a pain in the ass to replace.
For how expensive the thing is, it's pretty disappointing to hear that this is a common failure...
After mine was replaced, I changed my settings to 2db volume steps. It's less precise, but I don't have to crank the knob as much (the Director is my main volume control). Hopefully that extends the life of it. I don't want a Conductor as I like having the display (temp and voltage readings are nice) and the tone controls (global bass/treble shelf). The Conductor seems pretty limited.
Re: Helix Director Encoder
Where did you source the part? Having a harder time than I thought it would be.
Re: Helix Director Encoder
If you take a few close and detailed pictures, especially of any markings or numbers ... then I promise I will stare at them really hard. I might be able to find something that looks similar on Digikey, but no promises!
Re: Helix Director Encoder
I know Peter got a small quantity once upon a time from Audiotec Fischer so it may be worth asking them for spares, I don’t know if numbers were present or not
i can certainly split a conductor open and see if there’s evidence of a number on that item, Maybe alps do a better quality replacement perhaps
Re: Helix Director Encoder
Quote:
Originally Posted by
Justin Zazzi
If you take a few close and detailed pictures, especially of any markings or numbers ... then I promise I will stare at them really hard. I might be able to find something that looks similar on Digikey, but no promises!
Did you guys ever find a replacement? I'm getting ready to tear down my Conductor
1 Attachment(s)
Re: Helix Director Encoder
This is the encoder I bought quite some time ago. IIRC it is an Alps brand that I purchased. I never got around to installing it but it appears that it will work correctly. Part number is high lighted in screen shot.
Attachment 18586