1 Attachment(s)
How to Add 2nd Aux to 2010 Honda Element
2010 Element. Stock radio with no Nav.
New to this thread which learned of from BgAl205 and his posts on ElementOwnersForum.
I want to add a 2nd (or instead,TBD) aux-in. The OEM one is on the passenger side; I need one on the driver side. I'd like to connect the two wires from the 3rd party 3.5mm port I bought for the dash to the back of the radio. But in the photo below of the back of my radio, where exactly do I connect those two wires? I have looked and have yet to find anything specific. Maybe there is a harness like the Scosche HAAXB. But this does not fit a 2010.
Thank you.
Attachment 6417
Re: How to Add 2nd Aux to 2010 Honda Element
First of all, welcome to the community!
I only have the schematic for a 2008, but assuming nothing changed for 09/10, there should be a 6-wire harness with yellow, blue, green white, brown, and light green with red tracer.
The green is the signal negative, white is left channel positive, and brown is right channel positive. The yellow wire (positive) and Blue wire (negative) is the auxiliary detection circuit which tells the radio that something is plugged in and it should switch to AUX mode. Light green/red is just a shield.
I don't think your two-wire port will work. First of all, it wouldn't be stereo...and secondly, it wouldn't have any way to tell the radio that something's plugged up.
You may have to get a stereo 3-conductor jack to splice in, and maybe put a switch beside it to fool the sensor circuit in switching to AUX mode.
3 Attachment(s)
Re: How to Add 2nd Aux to 2010 Honda Element
Quote:
Originally Posted by
BigAl205
First of all, welcome to the community!
I only have the schematic for a 2008, but assuming nothing changed for 09/10, there should be a 6-wire harness with yellow, blue, green white, brown, and light green with red tracer.
The green is the signal negative, white is left channel positive, and brown is right channel positive. The yellow wire (positive) and Blue wire (negative) is the auxiliary detection circuit which tells the radio that something is plugged in and it should switch to AUX mode. Light green/red is just a shield.
I don't think your two-wire port will work. First of all, it wouldn't be stereo...and secondly, it wouldn't have any way to tell the radio that something's plugged up.
You may have to get a stereo 3-conductor jack to splice in, and maybe put a switch beside it to fool the sensor circuit in switching to AUX mode.
------------------
Thanks, BigAl. Could you post / send the schematic? My manual ("2007-2010 Service Manual Vol. 2") shows only a 5-wire connector(please see attached scan).
Attachment 6419
I had already ordered a Philmore 70-534 3.5mm 3-connector jack. Where would I connect the 3rd connector on that jack? I just read that maybe I need a "3.5mm closed circuit stereo jack." Yikes.
Attachment 6421
TIA